2021 John Deere S 100 Series S130

2021 John Deere S 100 Series S130

22 hp (16.4 kW)* V-Twin Engine

42-in. Edge™ Mower Deck

Electric PTO, Hydrostatic Transmission w/side-by-side pedals

Easy Change™ 30-Second Oil Change System

15-in Open-Back seat and standard front bumper

Easy to read fuel gauge with low light visibility

2 year/120 hour bumper-to-bumper warranty

Features may include:

• 22-hp (16.4-kW) V-twin engine has plenty of power and torque to handle tough mowing, mulching, and bagging:

• V-twin cylinder design for greater torque, lower vibration, and improved sound quality

• Electronic ignition for fast starts

• Spring-return feature to ensure the operator does not mistakenly leave the throttle lever in the choke position

• Cast-iron cylinder liners for longer engine life

• Overhead valves for excellent power and fuel economy

• Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes

• More effective when operating the tractor on an incline

• The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine.

• The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of engine oil.

• The functionality does not stop with ease of use. The Easy Change oil system has several meaningful benefits over the traditional oil filter system of the 100 Series:

• A synthetic filter material is used for more predictable filtering and longer life.

• Filtering capacity is greater than with a standard oil filter.

• More filter surface area

• More oil flow capacity

• The system has 40 percent more oil volume.

• The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

• Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.

• One-piece, steel fender deck is bolted to the frame.

• The front axle is constructed of solid cast iron that will not bend:

• Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.

• Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.

• Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.

• The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

• Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.

• One-piece, steel fender deck is bolted to the frame.

• The front axle is constructed of solid cast iron that will not bend: